Tag Archives: Basic
Basic Indoor hydroponics Gardening Guide – Benefits and Types of Indoor Hydroponic Systems
Efficiency in comparison to traditional soil growing systems would be one of the major advantages. Commercial production and just plain hobbyists would find that moving from regular soil growing methods to the modern Indoor Hydroponic systems to be more beneficial. Freedom from uncontrollable variables such as the weather, climate and time of day would be the most important factor over traditional growing methods. Farmers in Middle East countries would be able to grow plants such as vegetables only previously grown in tropical countries. Light and amount of growth nutrients to be absorbed by the plants could be optimized for best results without wasting any resources. Plant care could be individualized as to the amount of nutrients and light they receive at any time of the day. Plants grown in pots or plots tend to reach a growth plateau, wherein they become root bound and transplanting them is the best solution. This may present the individual with a sense of frustration and could be messy. Expert advice and appropriate planning beforehand could eliminate such unwarranted difficulties experienced with soil based planting.
Expenses made at the start of the project can be offset by the advantages in the long run. Fertilizers with their ever rocketing cost are major source of expenses in plant cultivation. Plants only take the nutrients they can absorb so maximum nutrient absorption without the risk of putting too much fertilizers is eliminated. But the risk of putting too much nutrients which leads to root damage remains, so proper nutrient feeding is advised.
Basic Indoor hydroponics Gardening Guide – Hydroponic Nutrient Solutions
Improper use of fertilizers is the common cause of many plant problems. Inadequate amounts cause weak and under nourished plants while an amount above desired quantities may burn and even kill the plant. Good judgment and decisions are required when a plant grows. Below are guidelines for applying nutrient solutions.
Hydroponic nutrient solutions are normally sold in concentrated forms. They are then added to the water supply with a specific ratio. Ideally, 150-600 parts per million consists a normal concentration of hydroponic solution. Normally sold in two or three parts because direct combination is not possible. Remember to mix nutrients into water first before combining, never combine two nutrients together.
There are specific proportions for each plant type and phase of its growth. Advances in nutrient solutions have greatly improved the precision of concentration based on a plants growth stage. Hydroponic nutrient solutions are usually sold in “grow” or “growth” formulas for the vegetative phases and “bloom” or “flower” for the flowering phase of the growth cycle. Remember to switch to the bloom formula during the bloom stager to increase yields exponentially and max out your plants capacity.
]]>
In poor growing conditions weak nutrients are recommended. Low lighting, overheated gardens, crowding and root bound plants. Weak nutrients are also ideal for newly rooted cuttings and for transporting plants or when they are in the transition of growth cycles.
Basic Indoor hydroponics Gardening Guide – Hydroponics Growing Mediums
These are the materials that mimic the soil in everyday gardens. It serves as a support system for your hydroponic indoor garden. They function mainly for anchoring the roots and a reservoir for water and nutrient solutions. Special attention is also placed on aeration or proper plant respiration and drainage. A balance must be kept between keeping the plant nourished and over saturating the roots.
Choice of a specific growing medium mainly depends on the type of growing system to be used. Certain systems have no mediums used because plant growth is best when roots are suspended in air or water. Improvement made with newer growing medium mixtures has been introduced for optimum plant growth in certain systems. Ideally, an equal mixture of water and air is advised making it available for the roots to utilize at all times. Water by gravity always moves downward through coarse mediums only to be deposited in the bottom of the container. This is eliminated with the use of a hydroponic system as water is constantly circulated in the system. The only system that this would not work would be the Ebb and Flow Systems.
Recyclables, it can be constantly reused indefinitely reducing upkeep costs for your indoor garden. Size of the pot is one limiting factor as they do not possess good nutrient lifting ability, but effectiveness is enhanced in smaller pots and containers. Another advantage would be their neutral pH and they don’t retain nutrients. Ventilation and aeration are also maximized because of the spaces created between pebbles.
Basic Indoor hydroponics Gardening Guide – Indoor Grow Lights Fluorescent tubes, Hps and MH
Inexpensive and readily available in hardware stores and be utilized with regular light sockets. Producing less heat or none at all compared to full-size fluorescent grow lights.
Not just because of its small size and low heat output; compact fluorescent lights also produce the widest range of color spectrums to any type of lighting. It is ideal for shelf gardening due to their low heat output making the use of multiple shelves on top of each other possible. Compact fluorescent lights can be used with seedlings and small plants in a well designed hydroponic system indoor garden.
Common Problems with Compact Fluorescent Light Bulbs
Problems with compact fluorescent light bulbs like inefficiency and poor light penetration are common. Several compact fluorescent bulbs maybe used and consume energy as that of one HPS bulb, but do not produce the same useable light for the hydroponic indoor garden.
Optimizing Fluorescent Grow Lights
With the disadvantages of comparative inefficiency compared to HID lights, several things maybe done to counteract this.
Properly matching lights to the corresponding growth cycle.
Increasing Watt ratings increases light penetration
One cheap and easy way to maximize energy consumption is by the use of reflectors. Compact fluorescent lights have a 360 degree of distribution but only 90 degrees of it can be practically used. Reflectors direct the light to corners in order to maximize the light produced.
Basic Indoor hydroponics Gardening Guide – Plants Growth Factors
Complete freedom from environmental factors gives indoor hydroponic gardening its ultimate advantage. All the elements needed for optimum plant growth are provided by the indoor hydroponic gardening system. Light, temperature, pH, CO2 and Oxygen are important factors that should be considered in planning your indoor hydroponic garden system.
Essential sugars are created by plants through photosynthesis which is the process of converting carbon dioxide, water and nutrients into energy. Light is considered the most important factor because it provides energy for this chemical reaction. Studies show that an increase in light intensity directly increases the amount of sugar produced. This steadily goes up till the saturation point for light is reached by the plant. Increasing the level of light received by the plant should also be considered. Normally, a plant receives around 8-12 hours of sunlight in a day depending on the season. Plant exposure to this amount of light received in a day should be maintained in an indoor hydroponic garden system. Spacing is also important, be sure that they don’t block the light and ensure all plants received equal amount of light.
]]>
Plants not receiving enough grow light will have lasting negative effects on its growth even when corrected. Some characteristics are stems which are spindly and elongated leaving them ineffective in supporting plant growth. A decrease in the amount and size of the leaves is also one problem. More damaging effects of improper lighting are a decrease or absence of fruits, decreased overall quality and a change into a yellowish pigmentation for the plant.